Intel calling 10th gen processor's code name "Comet Lake" are still based on 14nm 'Skylake' process.
Intel announced 32 new models in its 10th generation lineup, starting with the Celeron chips at the bottom all the way up to the i9 10900K. We are not going to discuss all of them shortly.
Comet Lake is the fifth iteration of Intel’s very profitable Skylake microarchitecture, built on Intel’s 14++nm process, at a time when the competition is on 7nm with sixteen cores. The crux, according to Intel, is that it will offer the best gaming experience in this market.
Users wanting the 10-core 5.3 GHz will need to purchase the new top Core i9-10900K processor, which has a unit price of $488, and keep it under 70 ºC to enable Intel’s new Thermal Velocity Boost. Not only that, despite the 125 W TDP listed on the box, Intel states that the turbo power recommendation is 250 W – the motherboard manufacturers we’ve spoken to have prepared for 320-350 W from their own testing, in order to maintain that top turbo for as long as possible.
The range of 32 new processors from Intel will vary from two core Celeron parts at 35 W all the way up to ten-core Core i9 hardware rated for 125 W, with per-unit pricing from $42 to $488. The standard rated TDP is 65 W, with the overclocked models at 125 W, the low-power T models at 35 W, and Pentium/Celeron at 58 W. All of the Core i3, i5, i7, and i9 processors will have HyperThreading, making the product stack a lot easier to understand. Certain models will also have F variants without integrated graphics, which will have a slightly lower per-unit cost.
Users looking for 8 cores and up will be in the $300 bracket. All of these processors support dual channel DDR4-2933, while others lower in the stack only support DDR4-2666 officially. Intel has increased the amount of features on the chips with respect to how turbo performs. As a rough guide here:
Base Frequency: The guaranteed frequency when not at thermal limits
Turbo: A frequency noted when below turbo power limits and turbo power time
All-Core Turbo: The frequency the processor should run when all cores are loaded during the specified turbo time and limits
Turbo Boost 2.0: The frequency every core can reach when run with a full load in isolation during turbo time
Turbo Boost Max 3.0: The frequency a favored core can reach when run with a full load in isolation during turbo time
Thermal Velocity Boost: The frequency a favored core can reach when run with a full load in isolation and is below the specified temperature (70ºC for CML-S) during turbo time
Intel TVB All-Core: The frequency the processor should run when all cores are loaded during the specified turbo time and limits and is below the specified temperature (70ºC for CML-S) during turbo time.
In this case, Intel’s Thermal Velocity Boost (TVB) limits for the i9-10900K are 5.3 GHz single core, 4.9 GHz all-core, and after the turbo budget is used, the CPU will operate somewhere above the base clock of 3.7 GHz. If the processor is above 70ºC, then TVB is disabled, and users will get 5.2 GHz on two favored cores (or 5.1 GHz for other cores), leading to 4.8 GHz all-core, until the turbo budget is used and then back to somewhere above the base clock of 3.7 GHz.
Beyond that, it’s worth pointing out the low power processors, such as the Core i9-10900T. This processor has a TDP of 35 W, and a base frequency of 1.9 GHz, but can turbo all cores up to 3.7 GHz. Here’s a reminder that the power consumed while in turbo mode can go above the TDP, into the turbo power state, which can be 250 W to 350 W. I’ve asked Intel for a sample of the processor, as this is going to be a key question for the chips that have the strikingly low TDP.
With the F processors, the ones without integrated graphics, the price saving seems to be lower for Core i9 than for any other of Intel’s segments. The cost difference per-unit between the 10900K and 10900KF is only $16, whereas the 10700 and 10700F is $25.
None of the Core i5 or Core i3 processors have the favored core support, with only Turbo Boost 2.0. We’re also reduced down to DDR4-2666, as Intel applies more segmentation to its product lines. Most of these processors have integrated graphics, perhaps suggesting that the markets for these processors might not always have access to a discrete graphics card.
Intel’s cheapest quad-core, the i3-10100, will be on sale for $122. This is still a way away from AMD’s cheapest quadcore, the 3200G, which retails for $99. With AMD also announcing the Ryzen 3 3100 at $99 with Zen 2 cores inside, up to 3.9 GHz, it’s going to be an interesting battle to see if Intel can justify the $23+ cost differential here.
Intel Box style